Home | About Us | Editorial Board | Current Issue | Archives | Search | Instructions | Subscription | Feedback | e-Alerts | Login 
Journal of Indian Society of Pedodontics and Preventive Dentistry Official publication of Indian Society of Pedodontics and Preventive Dentistry
 Users Online: 774  
 
  Print this page Email this page   Small font sizeDefault font sizeIncrease font size
 ORIGINAL ARTICLE
Year : 2021  |  Volume : 39  |  Issue : 1  |  Page : 53-60

The effect of sterilization and disinfection on the physical-mechanical properties of preformed crowns


Department of Pediatric and Preventive Dentistry, Karnavathi School of Dentistry, Gandinagar, Gujarat, India

Correspondence Address:
Dr. Shital Kiran Davangere Padmanabh
Karnavathi School of Dentistry, A/907, Uvarsad, Gandinagar - 382 422, Gujarat
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/jisppd.jisppd_508_20

Rights and Permissions

Introduction: Different sizes of crowns may be tried on children since there is no universal crown size because of distinctions in tooth morphology from one child to other. During the process of trial and error, the crown gets contaminated which needs to be sterilized for reuse of crown. This study was carried out to evaluate the physical–mechanical outcome after the sterilization and disinfection of pediatric preformed crowns. Materials and Methods: In total, sixty crowns consisted of 20 each, stainless steel crowns (SSCs) (3M ESPE), preveneered stainless steel (Kinder Krowns), and Zirconia crowns (Kinder Krowns) which were divided into four groups. G1 in which crowns did not undergo any sterilization, G2 consisted of fast sterilization, similarly G3 was slow sterilization, and G4 underwent chemical disinfection using Korsolex Plus for 15 min. Following sterilization, all the crown samples were observed under a stereomicroscope at ×200 magnification and assessed for color change, crazing, dimensional stability, and fracturing. Post hoc Tukey test and two-way ANOVA were performed for comparison between types of crowns and sterilization methods, with a significance level was set at P < 0.05. Results: There was no color change or fracturing following sterilization among crowns in any of the groups. Highest crazing was noted in stainless steel and the least in Zirconia crowns. Preveneered stainless steel was the most dimensionally stable and SSCs was the least. Conclusion: No color changes and fracture were noted in any type of crowns. Preveneered stainless steel was most dimensionally stable followed by Zirconia and SSCs. Maximum crazing was seen in SSCs and nil in Zirconia.






[FULL TEXT] [PDF]*


        
Print this article     Email this article
 Next article
 Previous article
 Table of Contents

 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
 Citation Manager
 Access Statistics
 Reader Comments
 Email Alert *
 Add to My List *
 * Requires registration (Free)
 

 Article Access Statistics
    Viewed486    
    Printed4    
    Emailed0    
    PDF Downloaded91    
    Comments [Add]    

Recommend this journal

 


Contact us | Sitemap | Advertise | What's New | Copyright and Disclaimer 
  2005 - Journal of Indian Society of Pedodontics and Preventive Dentistry | Published by Wolters Kluwer - Medknow 
Online since 1st May '05