Journal of Indian Society of Pedodontics and Preventive Dentistry
Journal of Indian Society of Pedodontics and Preventive Dentistry
                                                   Official journal of the Indian Society of Pedodontics and Preventive Dentistry                           
Year : 2020  |  Volume : 38  |  Issue : 1  |  Page : 56--63

Comparison of shear bond strength of light cure mineral trioxide aggregate and light cure calcium hydroxide with nanofilled composite: A stereomicroscopic and scanning electron microscope analysis


Anu Boby1, Deepika Pai1, Kishore Ginjupalli2, Sumit Gaur1 
1 Department of Pedodontics and Preventive Dentistry, Manipal College of Dental Sciences, Manipal Academy of Higher Education, Manipal, Karnataka, India
2 Department of Dental Materials, Manipal College of Dental Sciences, Manipal Academy of Higher Education, Manipal, Karnataka, India

Correspondence Address:
Dr. Deepika Pai
Department of Pedodontics and Preventive Dentistry, Manipal College of Dental Sciences, Manipal Academy of Higher Education, Manipal, Karnataka
India

Objective: The quest for ideal pulp capping materials has given rise to the development of newer materials such as light cure mineral trioxide aggregate (MTA). The bond strength of the pulp capping materials with overlying restoration is one among the several factors that are critical for the success of vital pulp therapy. Hence, we conducted this study to evaluate and compare the shear bond strength (SBS) of light cure MTA and light cure calcium hydroxide with nanofilled composite. Materials and Methods: Thirty acrylic blocks each with a central hole were prepared to uniform dimensions and randomly distributed into two equal groups. In Group I, light cure MTA, and in Group II, light cure calcium hydroxide was used as pulp capping materials. After the application of adhesive system, nanofilled composites were applied onto the pulp capping material using a cylindrical plastic matrix. The SBS was tested on a universal testing machine (Instrom 3366, UK) at a crosshead speed of 0.5 mm/min. The samples were examined under stereomicroscope and scanning electron microscope to analyze different modes of failure. Results: The results were statistically analyzed using independent sample t-test. Light cure MTA attained the mean SBS of 6.54 MPa and light cure calcium hydroxide attained the mean SBS of 6.56 MPa. There was no significant difference statistically in SBS of both the materials (P < 0.05). The modes of failure were predominantly mixed failure followed by cohesive failure within the restorative material in both Group I and II. Conclusion: The results of the study suggest that the SBS of light cure MTA and light cure calcium hydroxide is comparable. The modes of failure analyzed in both light cure MTA and light cure calcium hydroxide are not significantly different statistically. Hence, both materials can be successfully used as pulp capping material with nanofilled composite.


How to cite this article:
Boby A, Pai D, Ginjupalli K, Gaur S. Comparison of shear bond strength of light cure mineral trioxide aggregate and light cure calcium hydroxide with nanofilled composite: A stereomicroscopic and scanning electron microscope analysis.J Indian Soc Pedod Prev Dent 2020;38:56-63


How to cite this URL:
Boby A, Pai D, Ginjupalli K, Gaur S. Comparison of shear bond strength of light cure mineral trioxide aggregate and light cure calcium hydroxide with nanofilled composite: A stereomicroscopic and scanning electron microscope analysis. J Indian Soc Pedod Prev Dent [serial online] 2020 [cited 2022 Aug 14 ];38:56-63
Available from: http://www.jisppd.com/article.asp?issn=0970-4388;year=2020;volume=38;issue=1;spage=56;epage=63;aulast=Boby;type=0